Detailed explanation of maintenance and usage methods for small granulators

December 26, 2023

1. Usage: Start the machine and pour the mixture into the bucket. With the swinging effect of the rotating drum, the material is squeezed through the sieve to form particles. If crushed blocks are formed, they should be gradually added and not filled up to avoid excessive pressure and damage to the sieve.
2. Attention: If the powder in the powder hopper cannot stop, do not use your hands to shovel to avoid hand injuries. Use a bamboo shovel or stop working.
Maintenance instructions for small granulator
1. Regularly inspect the components, once a month, to check the flexibility and wear of the moving parts such as the worm gear, worm gear, and bearings. If any absenteeism is found, it should be repaired in a timely manner and not used reluctantly.
2. The machine should be placed in a dry and clean indoor environment, and its atmosphere should not contain acids or other corrosive gases that may flow to the machine components.
3. After the machine is used or stopped, the rotating drum should be taken out for cleaning and brushing the remaining powder in the hopper, and then installed properly to prepare for the next use.
4. If the machine is not used for a long time, it must be wiped clean all over the body, and the smooth surface of the parts should be coated with rust proof oil, and covered with a cloth.

Small open mill: 2 inches, 3 inches, 4 inches, 6 inches, 7 inches, 8 inches, 9 inches, 10 inches, 12 inches, 14 inches, and 16 inches laboratory mixer functions include electric heating, water cooling, oil heating, integrated cooling and heating, automatic rubber flipping machine, rubber mixing machine, plastic mixing machine, and mixer

Small internal mixer: 0.05L0.1L0.2L0.3L0.5L1L2L3L5L8L10L15L20L25L35L Internal mixer desktop, pressurized, flipped, open close, clutch, closed, electrically heated water cooled laboratory internal mixer, vacuum internal mixer, metal ceramic powder internal mixer, internal mixer granulator integrated machine

Small tablet press: 5T10T20T25T30T50T65T100T150T200T300T single layer, double layer, four column, with safety door, upper layer heating and lower layer water cooling, one layer electric heating and water cooling integrated, electric heating, water cooling, oil heating, hydraulic system, manual, semi-automatic, pneumatic, fully automatic laboratory small tablet press, hot pressing molding machine, rubber and plastic molding machine.

Small vulcanizing machine: 5T10T20T25T30T50T65T100T150T200T single layer, double layer, four column, with safety door, electric heating, water cooling, oil heating, hydraulic system, pneumatic, manual, semi-automatic, fully automatic flat vulcanizing machine, vacuum vulcanizing machine.

Entre em contato conosco

Autor:

Mr. GuangLei Zhu

E-mail:

495433589@qq.com

Phone/WhatsApp:

+8618925886717

Produtos populares

Notícias